Today, LET's talk about the air output size of the aerator. The gas output per meter of the commonly used nanotube 16*10mm is the effective gas output of 0.002-0.005m3/min. This is the gas output of the high density nanotube, and the effective gas output per minute of the low density  

The quantity is about 0.03-0.007m3/min!  Based on these data, we can calculate the amount of air out of the aeration disc!  Each aeration tray is used is about 5-7 meters away from the aeration pipe, winding in the high and low plate shelf above!  From the above data, you can calculate the air volume of each aeration disk!  Take for example :60cm high and low disk +5 meters 16*10 nanotubes, the aeration disk gas output per minute in about 0.025m3/min right, if converted into an hour is about 1.5m3/min, of course, there are errors in the calculation, this is only theoretical data, value!  In the actual application, the circulation economy aquaculture system in the pond also has some changes according to different water level data!  Based on practical experience, flexible tongue use!  

The effect of the aeration pipe:  

Intuitive effect is divided into: small bubbles, large bubbles and other effects!  This is directly related to the high and low density of nanotubes!  In this chapter we say the aeration effect, mainly related to the fan!  Aeration pipe is only as a tool for air, itself does not have the effect of large effect  

Small, mainly the root fan air supply has a certain relationship!  Saddle a good horse!  With the use of aeration pipe, also need a reasonable with a zengzeng oxygen machine!  Wind just to good outside can!  The oxygenation effect will be ideal.  If you don't know what type of fan to use, you can contact someone who sells aerator  

Manufacturers, or directly contact us, the company has more than 10 years of experience in aquaculture, can help users choose the right size of fan equipment!  Share a primary selection skills, if it is a small area, breeding density is not high, you can choose vortex aerator, the price of this fan is relatively low, more economic!  It is more suitable for some small area breeding users!  If used to supply a large area of aquaculture, the machine is a little lack of stamina, power is not enough!  So for aquaculture area of more than 4 acres of users, it is recommended that users choose to use roots fan, this is also a kind of oxygenator machine, strong power, stable operation!  Of course, the price is also much higher than the vortex type, the current professional aquaculture plants are using this type of fan!  

How to quickly choose the specification of the aerator:  

There are many kinds of aeration models, many users do not do their own should choose which specifications, in this to share with you, generally according to the depth of their pool to select!  Because the water depth is high and the pressure is high, the high-density tube with small pores is chosen to aerate, so the effect will have so much influence!  We try to improve the aeration effect as much as possible!  So we have to be careful.  If your pool is deep in  

16x10mm nanotubes (high density) is recommended for depths of 0.3-1.2 meters. If your water depth is about 1.2-2 meters, you can choose 18x10mm aerator (high density) or 20x10mm nanotubes (high density). If the water depth is about 2-3 meters,  Recommend to use 25*12mm specifications (low density) about 3-5 meters recommended to use 25*16mm aeration pipe (low density) by increasing the inner diameter of the air volume to improve the aeration output!  

Welcome to  contact:+8618013418091(Whatsapp/Wechat)

                                         +8618013418097(Whatsapp/Wechat)