At the bottom of the installation of aeration pipe, this mainly depends on whether the bottom of the pool is too much silt and so on. If there is too much silt, it is suggested that we do not do the laying method in the form of straight pipe at the bottom, which is not convenient for their later maintenance. It is recommended to use the form of throwing aeration plate!, here there are users to choose a large inner diameter of the nanotube, and then insert PVC pipe into it for drilling, this kind of installation, is not very good!This will lead to a decrease in the effect of microporous nanotubes aeration!Now in the aquaculture industry, the aeration effect of the 360-degree air feeder is also obvious to all!Also received a lot of user feedback, this is very satisfied!The quality evaluation of the nanotubes is also very high, including some users who use the aerator alone!

Color bar difference of microporous aerator:

Some users in the process of using found that some nanotubes are single wire, some are double wire!Mistaking is what difference, in fact, from a professional point of view, this is the same in the effect of aeration, but the difference in appearance, from the subtle effect is not very big!Some businesses take this to provide users with a different speech resulting in users themselves do not know the difference!To say the difference may be the most obvious is mainly the difference between the surface of the nanotubes, some of the rough nanotubes, some of the surface is smooth, this is mainly because the size of the hole on the tube is different, the rough surface of the hole out of the bubble, the smooth surface of the hole out of the bubble small ~!

Welcome to contact:+8618013418091(Whatsapp/Wechat)

                                             +8618013418097(Whatsapp/Wechat)